Multitech MultiVOIP MVP210 User Manual page 103

System Information screen
This screen presents system information at a glance. It is found under the Configuration section and its primary
use is in troubleshooting. The information presented in figure 6-1 is for reference only and is not meant to be an
exact match of your system.
Field Name
Boot Version
Firmware Version
Configuration Version
Phone Book Version
IFM Version
Mac Address
Up Time
Hardware ID
Multi-Tech Systems, Inc.
Figure 6-1: System information
System Information Parameter Definitions
Values Description
Indicates the version of the code that is used at the startup (booting) of the VOIP.
nn.nn
alpha- The boot code version is independent of the software version.
numeric
Indicates the version of the MultiVOIP firmware.
nn.nn.nn
alpha-
numeric
Indicates the version of the MultiVOIP configuration software.
nn.nn.
nn.nn
alpha-
numeric
Indicates the version of the MultiVOIP phone book being used.
nn.nn
alpha-
numeric
Indicates version of the IFM module, the device that performs the transformation
nn
alpha- between telephony signals and IP signals.
numeric
numeric Denotes the number assigned as the VOIP unit's unique Ethernet address.
days: Indicates how long the VOIP has been running since its last booting.
hours:
mm:ss
alpha- Indicates version of the MultiVOIP circuit board assembly being used.
numeric
Chapter 6: Using the Software
103