Multitech MultiVOIP MVP210 User Manual page 79

5. In the "Destination Pattern" field of the Add/Edit Outbound Phonebook screen, enter the digits from step
4 followed by the digits from step 3.
North America,
Long-Distance Example
Seattle/Chicago system.
: enter 81312 as
Answer
Destination Pat-tern in
Outbound Phone-book of
Seattle VOIP.
6. In the "Remove Prefix" field, enter the initial PBX access digit ("8" or "9").
North America,
Long-Distance Example
Seattle/Chicago system.
: enter 8 in "Remove Prefix"
Answer
field of Seattle Outbound
Phonebook.
Note: Some PBXs will not 'hand off' the "8" or "9" to the VOIP. But for those PBX units that do, it's important to enter
the "8" or "9" in the "Remove Prefix" field in the Outbound Phonebook. This precludes the problem of having to make
two inbound phonebook entries at remote VOIPs, one to account for situations where "8" is used as the PBX access
digit and another for when "9" is used.
7. In the "Protocol Type" field group, select the VOIP protocol that you will use (H.323, SIP, or SPP). Use the
appropriate screen under Configuration | Call Signaling to configure the VOIP protocol in detail.
8. Click OK to exit from the Add/Edit Outbound Phonebook screen.
Multi-Tech Systems, Inc.
Euro, National Call Example
London/Birmingham system.
Leading zero of Birmingham area
code is dropped when combined
with national-dialing access
code. (Such practices vary by
country.)
: enter 90121 as
Answer
Destination Pattern in Outbound
Phonebook of London VOIP.
Not 900121.
Euro, National Call Example
London/Birmingham system.
: enter 9 in "Remove Prefix"
Answer
field of London Outbound
Phonebook.
Chapter 5: Phonebook Configuration
Euro, International Call
Example
Rotterdam/Bordeaux system.
: enter 903305 as
Answer
Destination Pattern in
Outbound Phonebook of
Rotterdam VOIP.
Euro, International Call
Example
Rotterdam/Bordeaux system.
: enter 9 in "Remove Prefix"
Answer
field of Outbound Phonebook for
Rotterdam VOIP.
79