Multitech MultiVOIP 200 MVP200 Quick Start Manual page 60

MultiVOIP Quick Start Guide
20. Click OK to return to the Main menu.
21. Click Download Setup to write the new configuration to
the Client unit. The Save Setup dialog box is displayed.
22. Select (check) the Save Current Setup as User Default
Configuration and click OK. The Writing Setup dialog box
is displayed as the setup configuration is written to the
MultiVOIP 200.
After the setup is written to the MultiVOIP 200, it reboots.
23. Check that the Boot LED on the MultiVOIP 200 is off after
the download is complete. This may take several minutes
as the MultiVOIP 200 reboots.
24. You are returned to the Main menu.
Your MultiVOIP 200 is operational at this time.
Repeat the process for each of the Client units. When all
Clients have been configured, go to "Deploying the Network."
60