Multitech MultiVOIP 200 MVP200 Quick Start Manual page 42

MultiVOIP Quick Start Guide
43. To add Channel 2 of the Client MultiVOIP 200, click Add
(+) and the Add/Edit Phone Entry dialog box is displayed
again.
44. Enter the phone number for the remote (Client) MultiVOIP
200 in the Station Information group Phone Number
field (e.g., 202).
45. Click inside the Description field and enter a description
for the remote MultiVOIP 200 phone number for Channel 2.
For example, "London Office 2."
46. In the Station Identification group, select HUNT GROUP
#2 from the Hunt Group drop-down list, enter the London
Office 2's IP Address (202.056.039.100), and accept the
H.323 industry standard Port value (1720) used to
communicate with other H.323 endpoints.
Note: Depending on your requirements, you may want
calls that cannot make a connection to London Office 1
(Hunt Group #2) to roll over to the New York office instead.
In this case, you would configure that phone entry to be
listed as a member of HUNT GROUP #1.
42