Multitech MultiVOIP 200 MVP200 Quick Start Manual page 27

Configuring the MultiVOIP
If your country/region is not the default USA, click the
Regional tab and proceed to step 25; otherwise, proceed
to step 26 to begin building your phone directory database.
25. To change the Tone Pairs on the Regional tab, click the
Country/Region down arrow and highlight your specific
country or region.
Note: If your country or region is not listed, click the
Custom button to define it.
The Tone Pairs group enables you to select/modify the
parameters according to choice. Click OK when finished.
Proceed to step 26 to begin building your phone directory
database.
27