Multitech MultiVOIP 200 MVP200 Quick Start Manual page 50

MultiVOIP Quick Start Guide
Channel Setup dialog box. The Channel Setup dialog
box is displayed. The four tabs in this dialog box define the
channel interface, voice/fax parameters, Billing/Misc
parameters, and regional telephone parameters for each
channel.
Configure each channel for the type of interface you are
connecting to. The Interface tab defaults to Channel 1 in
the Select Channel field. To change the channel number,
click the drop-down arrow and the list of channels is
displayed. Highlight the channel you want to configure.
Feature options are enabled or disabled (grayed out)
according to the interface type that you select. The one
option available for all interface types is the Inter Digit
Time option. This option defines the maximum amount of
time that the unit will wait before mapping the dialed digits
to an entry in the Phone Directory Database. If too much
time elapses between digits, and the wrong numbers are
mapped, you will hear a rapid busy signal. If this happens,
it will be necessary to hang up and dial again. The default
is 2 seconds.
50