Tap RVG8_Network. The Enter Password window is displayed.
3
Enter the Password: 7794AA6500EC239BFF4554DD80.
4
When the WiFi connection is established,
5
window and a check appears next to RVG8_Network.
Tap
to return to the Settings window.
6
You must now configure the preference settings of the RVG Mobile Application.
Configuring the Preference Settings
To configure the preference settings, follow these steps:
In the Settings window, scroll down until the end and tap
1
window is displayed. If you want to rename your RVG sensor, tap in the Device Identification field
and enter the new name.
In the RVG Mobile window, tap the Acquisition field. The Mode window is displayed.
2
KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01
Tap
signal is displayed on the WiFi Networks
. The RVG Mobile
45