1
Introduction
Back Panel Connectors
Figure 3.
Remote start connector
The remote start connector is the external connector for the remote start
circuitry on the LAN/MS control card. It receives remote start signals from the
GC.
LAN (I/O) connector
The LAN cable from the data system is a dedicated LAN line that is connected to
the LAN communications connector. It carries all data communication between
the PC and the MS.
Directly connect a single dedicated LAN cable between the PC and the 7250
C AU T I O N
Q-TOF. Do not use a LAN switch, router, or other device between the PC and
the Q-TOF.
7250 Accurate-Mass Q-TOF Troubleshooting and Maintenance Manual
Back panel connections
15