Agilent Technologies 7250 Troubleshooting And Maintenance Manual page 77

4 General Maintenance
5 Disconnect the GC/MS interface cable. Disconnecting the cable with the GC
If you are moving or storing the MS, see
GC/MS interface
Interface cable
Figure 9. Separating/connecting the MS and GC
7250 Accurate-Mass Q-TOF Troubleshooting and Maintenance Manual
page 77.) The GC is guided as it slides by the spacer bracket underneath both
instruments.
on can cause a fault condition.
"To Move or Store the MS" on page 79.
77