Table of Contents
Advertisement
7
Replacement Parts
To Order Parts
To order parts for your MS, address the order or inquiry to your local
Agilent Technologies office. Supply them with the following information:
•
•
•
Some parts are available as rebuilt assemblies
Rebuilt assemblies pass all the same tests and meet all the same specifications
as new parts. Rebuilt assemblies can be identified by their part numbers.
The first two digits of the second part of the part number are 69 or 89 (such as
xxxxx-69xxx or xxxxx-89xxx). Rebuilt assemblies are available on an
exchange-only basis. When you return the original part to Agilent Technologies
(after you receive the rebuilt assembly) you will receive a credit.
If you cannot find a part you need
If you need a part that is not listed in this chapter, check the Agilent Technologies
Analytical Supplies Catalog or the online catalog on the Worldwide Web at
http://www.agilent.com/chem. If you still cannot find it, contact your Agilent
Technologies service representative or your Agilent Technologies office.
114
Model and serial number of your MS, located on a label near the power cord
connections to the mainframe.
Part number(s) of the part(s) needed
Quantity of each part needed
7250 Accurate-Mass Q-TOF Troubleshooting and Maintenance Manual
Advertisement
Table of Contents
Troubleshooting
