Static-Safe Practices; Power Requirements; Mating Connectors; Connecting The Detector - Agilent Technologies 85025A User's And Service Manual

Static-Safe Practices

Before cleaning, inspecting, or making a connection to a static-sensitive
device or test port, ground yourself as far as possible from the test port.
Discharge static electricity from a device before connecting it. ouch the
device brie y (through a resistor of at least 1 M ) to either the outer shell of
the test port, or another exposed ground. his discharges static electricity and
protects test equipment circuitry.

Power Requirements

he scalar network analyzer supplies power for the detector.
Mating onnectors
able 1-7 lists connector mechanical tolerances.
(part number 08510-90064) provides information on the proper maintenance,
inspection, and gaging of connectors.
onnecting the Detector
1. he 85025A/B/D/E cables plug into the connectors on the front panel of the
8757 series scalar network analyzer. With the cable plug key downward,
insert the multi-pin (DC) connector into the A input on the front panel of the
analyzer.
2. o secure the DC connector in the analyzer, turn the
3. Connect the RF input to the test device by turning the male connector's
outer
shell clockwise.
Ag lent 85025A/B/D/E
Microwave Connector Care
outer
shell clockwise.
Installat on 2-3