Xerox DocuColor 2240 User Manual page 80

U G ( M
S E R U I D E A C H I N E
Contrast
Auto Exposure
4 – 4 8
A )
D M I N I S T R A T O R
This sets up the default for Contrast in Lighter/Darker/Contrast on
the Image Quality/file format screen in Scan mode. Set the
contrast for the document to be scanned. The contrast setting is
enabled if Output Color is not set to B/W.
Enter the setting using the number buttons listed in the following
table. The default is 2, normal.
Set the default for Auto Exposure on the Image Quality/file format
screen in Scan mode.
Enter the setting using the number buttons listed in the following
table. The default is 0, Off.
Setting
Higher
0
1 High
2 Normal
Low
3
4 Lower
Setting
Off
0
Om
1
Description
Description