Xerox DocuColor 2240 User Manual page 73

Receiving Buffer-LPD
Spool
Receiving Buffer-NetWare
Receiving Buffer-SMB
Spool
Choose from the following options:
• Off - Spooling is not performed.
While the machine is processing or printing LPD data from a
client, it cannot receive other data from other clients through
the same interface. The LPD reception buffer can be set
between 64 ~ 1024 KB, in increments of 32 KB. The default is
256 KB.
• Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling
process. The size of the reception buffer for the spooling
process can be set between 512 KB ~ 32.00 MB, in
increments of 0.25 MB. The default is 1.00 MB.
NOTE:Printing data bigger than the memory size set here cannot
be received. If this happens, select Hard Disk Spooling or
Spooling Off.
• Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling
process.
The default is Off.
Set the reception buffer for NetWare.
The memory size can be set between 64 ~ 1024 KB, in increments
of 32 KB. The default is 256 KB.
Choose from the following options:
• Off - Spooling is not performed.
While the machine is processing or printing SMB data from a
client, it cannot receive other data from other clients through
the same interface. The SMB reception buffer can be set for
64 ~ 1024 KB, in increments of 32 KB. The default is 256 KB.
• Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling
process. The size of the reception buffer can be set between
512 KB ~ 32.00 MB, in increments of 0.25 MB. The default is
1.00 MB.
NOTE:Printing data bigger than the set memory size cannot be
received. If this happens, select Hard Disk Spooling or Spooling
Off.
• Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling
process.
The default is Off.
U G ( M
S E R U I D E A C H I N E
A )
D M I N I S T R A T O R
4 – 4 1