Border Erase - Xerox DocuColor 2240 User Manual

U G ( C
S E R U I D E O P I E R
Top & Bottom
Left & Right
1 – 4 0
)

Border Erase

The Border Erase feature enables you to eliminate unwanted
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase offers the following options which can be used
individually or combined together:
The default is 5mm.
The default is 5mm.
Center The default is 5mm.
The selected settings are applied to both the front and back of 2-
sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the Border Erase. For example, a 50% reduction
will reduce 30mm when a 15mm Border Erase is set.
When making copies the copier always automatically adds an
Border Erase of 2mm to the top, bottom, left and right. This
cannot be eliminated.
1
On the Added Features tab select Border Erase.
2
Select Variable Erase.
3
Press the up or down arrows to increase or decrease the Border
Erase amount(s) for Top & Bottom, Left & Right, and Center.
4
Select the icon that most closely resembles the Original
Orientation for the loaded document(s).
5
Select Start to make copies or Save to select additional features.