Output Color - Xerox DocuColor 2240 User Manual

U G ( S )
S E R U I D E C A N

Output Color

Auto Color
Full Color
Gray Scale
3 – 1 0
The Output Color selection allows you to define the kind of original
document you wish to scan. The default is Black.
The following options are available:
The Auto Color option enables the copier to determine if the
document is black and white or color. If the document is black and
white, the Black option is selected automatically. If the document
is colored, the Full Color option is selected.
The DADF or Document Glass Cover must be closed for the Auto
Color option to function.
In order for the scanner to accurately sense color on a document,
the color area must be greater than 50 mm (squared)
(approximately 2 inches squared). If the color area is less, select
the Full Color option. Also some very dark colors may be sensed
as black. In this case, select the Full Color option as well.
Best used when scanning color originals. The text in the
document will be clearer, and the color graduation will be
represented in greater detail.
The original will be scanned in gray scale. Black & White colors
are given shades, and neutral colors are reproduced.
Black The Black option should be selected when the desired output is a
black and white copy. Black and white copies can be made from
any original. With Black selected only Black toner is used.
1
Select the mailbox where the scanned data is to be stored.
2
Select the Output Color from the Basic Scanning screen.
3
Press Start to begin scanning, or select additional scanning
functions.