Xerox DocuColor 2240 User Manual page 20

Problem
Deletions on the copy
edges.
Copies made from
photographs show
color or background on
output edges
The copies made using
100% Reduce/Enlarge
feature do not include
the entire image along
the edge of the
document.
Output is too light
Output is too dark
Output has too much
contrast
Output has low
contrast
– Edge deletion on all sides of the copy is normal, and is greatest
on the lead edge of the copy. Set the Border Erase feature,
Variable Erase option, to 4mm to minimize the deletion. Select
the size for the original document on the Added Features tab and
an appropriate setting from the Reduce/Enlarge option from the
Basic Copying tab.
– Moisture may be present in the paper. Load a fresh supply of
paper into the trays.
– Some deletions may be caused by small pieces of paper
remaining in the copier/printer components after a paper jam has
been cleared. When clearing a paper jam, be sure to look for and
remove any paper fragments.
Most emulsions used to develop photographs have color. Sometimes
this color shows on the border of the photograph. To prevent the
color from being copied as part of the image or as background, use
the Border Erase feature on the Added Features tab to deliberately
erase the unwanted color or background from the edge.
Select the Original Size feature and program the exact size of the
dark bordered document that you wish to copy.
Use the Lighten/Darken feature to select a darker level. Select the
Text or Maps option in the Original Type feature.
Use the Lighten/Darken feature to select a lighter level. Select the
Photo option in the Original Type feature
Select less color (toward Lower) Saturation on the Image Quality tab.
Select more color (toward Higher) Saturation on the Image Quality
tab. Select the Maps option in the Original Type feature.
U G
S E R U I D E
Suggested Solution
( T )
R O U B L E S H O O T I N G
5 – 1 7