Multiple Up
The Multiple Up feature enables you to copy 2 or 4 images from
multiple originals onto a single page.
NOTE:When using this feature place the originals in the DADF.
NOTE:Depending on the size of the original, some image loss
might occur along the edge of the image.
The following options are available:
1 Up
Copies one image on each output copy.
2 Up
Copies two images on each output copy.
4 Up
Copies four images on each output copy.
1
On the Output Format tab select Multiple Up.
2
Select the desired option:
•
1 Up
•
2 Up
Select the desired Image Order:
•
Left to Right
•
Right to Left
•
Top to Bottom
U
G
( C
S E R
U I D E
O P I E R
1–51
)