Xerox DocuColor 2240 User Manual page 166

U G ( P )
S E R U I D E R I N T
Color Management
Paper/Output Tab
Output Options Tab
Graphic Tabs
Watermarks Tab
Fonts Tab
User Settings Tab
2 – 2 2
3
When all setting changes are completed, select OK.
Specify your printing options from the following:
NOTE: For additional detail about the contents on the tabs use on-
line help. Refer to the On-line Help procedure in the B.) Basic
Printing section in the User Guide (Print).
Allows you to associate color profile (s) with your color printer.
Selections include Job Type, Copies, Paper Size, Output Size,
Image Orientation, Mixed Orientation, Multiple Up, Output Color, 2
Sided Print, Output Destination, Paper Source, Paper Type
(Bypass Tray), or select Printer Status, Poster/Booklet, Print Area,
or Restore Defaults buttons.
Select from Front Cover, Feed Cover from, Transparency
Separators, Job Offset, Stapling, or select Margin Shift Restore
Defaults buttons.
Specify how you want to manipulate graphic images for your print
job. Select from the following options: Output Color, Print Mode,
Image Adjustment Mode, Image Types, Image Auto Correction, or
select the Image Settings, Color Balance, Profile Settings,
Detailed Settings, or Restore Defaults buttons.
For more information on how to set graphic options refer to section
C.) Special Printing in the User Guide (Print).
Specify watermark settings. Selections for watermarks include
First Page Only or In Background, Encircle, Text, Position, Angle,
or select the Restore Defaults button.
Use the TrueType Font control to select how TrueType Fonts will
be processed and printed.
The User Settings tab dialog provides options for you to save
frequently used print driver settings and then recall these settings
without having to configure again.