Paper; Differences From Copying - Xerox DocuColor 2240 User Manual

Paper

Differences From Copying

Tray 5 (Bypass Tray)
Caution for Printing
Automatic Tray Switching
Outputting Paper
B. Basic Printing
This section describes the differences of the paper to be used for
printing on this machine. Other than these, there is no difference
on using paper for copying and printing.
For more information on how to load paper, refer to the User
Guide (Copier).
When using Tray 5 (Bypass Tray), there is a restriction on the
orientation of loading paper.
When printing with Tray 5 (Bypass Tray), be sure to select Tray 5
(Bypass Tray) from the Paper Source menu on the Tray/Output
tab, and then select the correct paper type from the Paper Tray
(Bypass Tray) menu on the print driver screen.
• Refer to on-line Help of the print driver for details on
printing special papers like transparencies.
• For details on loading paper in Tray 5 (Bypass Tray), refer
to the User Guide (Copier).
If the paper size or type used for printing is different from the
selection on the print driver, or if the paper is loaded in an
unsuitable paper tray, it may cause paper to jam.
To enable the Auto Tray Switch feature, Auto must be selected
from the Paper Source menu on the Tray/Output tab.
NOTE: The Auto Tray Switch feature is displayed as Disable Auto
Tray Switch in the Common Menu and Internet Services.
To use the Job Offset feature you must first configure the setting
on the Configuration tab of the print driver. Refer to on-line Help of
the print driver for details.
U G ( P )
S E R U I D E R I N T
2–63