Settings - Xerox DocuColor 2240 User Manual

U G ( P )
S E R U I D E R I N T
Image Enhancement
Output Tray
Job Offset
Collated
Transparency Separators
2 – 6 0

Settings

This section describes the settings of the Printer Specific Options
list.
Specify whether to use the Image Enhancement function.
Selecting On smooths out the boundaries between black and
white when printing. This reduces jagged edges, thereby
artificially increasing the resolution of the image. When printing an
image (bitmap) composed of coarse halftone dots, smooth color
gradation is impossible in certain situations. In this case, select
Off.
Set the destination for the output.
• The items that can be selected vary according to whether
the Side Output Tray or Finisher Tray has been installed.
Shifting the output positions of adjacent jobs (print command) or
copies (sets) is called Job Offset. The positions of adjacent jobs or
sets of copies are shifted to the front and the next job or set of
copies is shifted to the back.
Selects whether to collate a multi-page file per set when they are
printed.
Specify whether to use transparency separators and the source of
the separators, if selected.
Select Auto for three paper source to automatically feed from the
paper tray with paper of the same size and in the same orientation
as the transparencies.
NOTE: When using Transparency Separators, be sure to load
paper of the same size and in the same orientation as
transparencies into the paper tray.
NOTE: The Transparency Separators function cannot be used in
the following situations:
• When anything other than Manual feed is selected for
Paper source in the Paper/Quality tab.
• When anything other than Transparency is selected for
Media type in the Paper/Quality tab.
• When anything other than Center Output Tray is selected
for Output Destination in the Advanced Options tab.
• When print on both sides is selected.