Viewing Printer Information; Cloning Printer Settings - Xerox WorkCentre 3615 System Administrator Manual
Black and white multifunction printer
Hide thumbs
Also See for WorkCentre 3615:
- User manual (214 pages) ,
- System administrator manual (126 pages) ,
- Quick use manual (21 pages)
Table of Contents
Advertisement
Initial Setup
Viewing Printer Information
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
2.
In CentreWare Internet Services, click Properties.
3.
To expand the menu, in the Properties pane, next to the General Setup folder, click the plus symbol
(+).
Click About Printer.
4.
5.
Under Version Information, view the following:
Printer Model: The specific printer model configuration.
−
−
Printer Serial Number: The unique factory-assigned serial number for the printer.
−
Controller: Version information for the firmware installed on your printer.
Boot: Version information for the boot code installed on your printer.
−
−
Engine: Version information for the engine software installed on your printer.
Network: Version information for the networking software installed on your printer.
−
6.
Under Page Description Language, view the version information for the PCL, PostScript, and PDF
software installed on your printer.
7.
Under Memory, view the RAM size and RAM disk of the printer. The RAM Disk function is available
only on printers without an optional SD memory card installed.
Cloning Printer Settings
You can use a clone file to copy your printer settings to other printers. If you are using a clone file to
copy your printer settings to another printer, ensure that both printers are the same model and have the
same version of software installed.
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note:
If you do not know the IP address of your printer, see
page 12.
2.
Click Properties > General Setup > Cloning.
To clone the settings from this printer, select Printer Settings.
3.
4.
To use the password for the destination printer, under Enter IP Address of Destination Printer, select
Use the printer's password.
5.
In the IP Address field, enter the IP address of the destination printer.
6.
If you selected Use the printer's password, in the Password field, enter the password for the
destination printer.
7.
Click Clone Selected Settings.
®
26
Xerox
WorkCentre
System Administrator Guide
®
3615 Black and White Multifunction Printer
Finding the IP Address of Your Printer
on
Hide quick links:
Advertisement
Table of Contents
