Table of Contents
Advertisement
2. Enter your base URL (e.g.
point descriptions based on the URL. Once the base URL is entered, the NetGuardian automatically attaches
a unique suffix to each alarm point. For example, if the base URL is
the base alarm at point 1 would be
www.dpstele.com/base2.html
3. To add a suffix other than html to the hyperlinks, insert the text
user to specify the extension. For example, if the base URL is
for the base alarm at point 1 would be
!
Hot Tip!
Any file type that is viewable in your Web browser (e.g. word document, PDF, txt, etc.) is a
linkable file.
4. The same link structure applies to the Ping Alarms, System Alarms, and Analog Alarms fields. See Table 2.D
for specific URL extension link information.
System Alarms
Analog Alarms
* Using the
code in the base URL enables you to link to any file type viewable in your Web browser.
&pntID;
4.3.5 Configuring Ports
You'll configure your unit's modem and terminal server ports from the Edit menu > Ports screen.
4.3.5.1 Modem Settings
To configure your NetGuardian for PPP or Dial-up access, you may need to enter information in the Modem fields
on the Ports screen.
To configure the modem port settings.
1. In the
field enter the number of rings before answering. (Default = 1)
Ring Count
2. The
and the
Dial Init
For example, the modem can be set to ignore the dial-tone by entering a character code in either the Answer
Init (into the NetGuardian) or the Dial Init (out from the NetGuardian).
3. Click
to save your modem port settings.
Submit Data
Change the modem settings from the Edit menu > Ports screen
http://www.dpstelecom.com
http://www.dpstele.com/base1.html
, and so on.
http://www.dpstele.com/base1.pdf/
Alarm Page
Base Alarms
Ping Alarms
Table 2.D. Specific link extensions
fields can be used if any other modem initialization settings need to be set.
Answer Init
). The NetGuardian creates the links from the alarm
http://www.dpstelecom.com
&pntID;
http://www.dpstele.com/&pntID;.pdf
Base URL web page link*
Base1.html - Base20.html
Ping1.html - Ping32.html
System1.html - System64.html
Analog1.html - Analog8.html
, Base Alarm Point 2 would be
into the base URL. This allows the
.
15
the link for
http://
, the link
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 and is the answer not in the manual?
Questions and answers