Configuring Ip Cameras - DPS Telecom NetGuardian 420 Web User Manual

!
Hot Tip!
Be sure to define the data port you are using for the ECU as an
To configure Building Access on T/Mon, see your T/MonXM manual.

4.3.20 Configuring IP Cameras

The NetGuardian SiteMon G2 provides users with live streaming video of their remote sites. The direct pan-and-tilt
features allows users to visually check the status of their sites from the convenience of their desktop. The
NetGuardian allows your to view up to four cameras from the NetGuardian web interface.
To configure your camera settings:
1. From the menu select
Edit
2. Enter the appropriate information in the
your cameras.
Note: See Section "Monitoring Camera Activity" for camera viewing options.
3. Click Submit Data to save your camera configuration settings.
View live streaming video of your remote sites via Web browser
Appropriate Web Browser Settings
In order to perform the pan-and-tilt functions of the camera, your Web browser must be set to check for newer
versions of stored pages at every visit to the page.
The directions for checking for newer versions of stored pages may vary depending on what version of
Windows you are running. The instructions below are relevant to Internet Explorer 5.5 and 6.0 only.
1. With the Web browser open (Internet Explorer version 5.5 or later), click on
from the drop-down menu.
Options
2. Click on the
Settings
3. Click on the
Every visit to the page
.
Camera
Name
button under the
Temporary Internet files
button and click Ok.
type.
ECU
, ,
Description IP Address
heading.
, and fields for each of
MAC Address
and select
Tools Internet
45