Table of Contents
Advertisement
46
4.3.21 Backup Configuration
With the NetGuardian 420 you can backup your current configuration from the Web Interface. These
configuration files can then be uploaded later, or uploaded to other NetGuardian 420 units.
How to backup your current configuration:
1. From the Edit menu select NVRAM
2. Click on the config.bin link to the right of
to download your configuration file.
Backup Configuration
3. Now your configuration should be saved. If you need to upload a configuration, follow the steps below.
How to upload a saved configuration:
1. Click the upload button at the top right corner of the Web Interface.
2. Click the "Choose File" button.
3. Browse to the location of the .bin file from the steps above.
4. Select that .bin file and press the "Upload" button.
5. You should now have the same configuration settings loaded from when you saved the .bin file above.
4.3.22 Alarm Sync
Clicking on the Alarm Sync link from the Edit menu will re-synchronize all of the NetGuardian alarms. This
command clears all alarms, so that a new notification is sent for all standing alarms. This allows you to easily test
alarm connections during turnup without rebooting the NetGuardian unit. A warning prompt will appear, click
to
Ok
continue or
to exit without resynchronizing your alarms.
Cancel
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 420 and is the answer not in the manual?
Questions and answers