Alphanumeric Pager Setup; Snpp Notification Setup; Numeric Pager Setup - DPS Telecom NetGuardian 420 Web User Manual

20

4.3.6.1 Alphanumeric Pager Setup

The alpha numeric pager can receive text messages including alarm descriptions, time of occurrence, and point
addresses.
Use the following steps to configure the alpha numeric pager settings:
1. Under the column, select type
Type
2. Enter the phone number of the Alpha numeric pager under the
3. Enter a personal identification number under the
4. Set the pager data rate (i.e. 300, 1200, 2400 or 9600). The default baud is 1200.
5. Select a pager word format (Data Bits, Parity, Stop Bits). The default setting is 7,Even,1.
1
2 4
01: Net Guardi an 14
99.1.1.3.1
3
TOWER L I GHTS A l arm
8
9:22

4.3.6.2 SNPP Notification Setup

Alpha numeric pagers can receive text messages including alarm descriptions, time of occurrence, and point
addresses using SNPP.
Use the following steps to configure the alpha numeric pager settings:.
1. Under the column, select type SNPP from the drop-down menu.
Type
2. Use the Phone field if a login username and password are required. They must be separated by a colon and
be no longer than 29 characters combined. Otherwire, leave this field blank.
3. Enter the numeric pager number under the PIN/Rcpt/Port heading.
4. Under the IPA field, enter the static IPA of the SNPP server. Port automatically defaults to 444.

4.3.6.3 Numeric Pager Setup

The numeric pager can receive point addresses of alarms.
Use the following steps to configure the numeric pager settings:
1. Under the column select
Type
2. Enter the phone number of the numeric pager under the
). Placing a comma after the phone number initiates a two second pause (per comma). This
555-1212,,,,,,,
allows enough time for the pager to answer before the NetGuardian sends the alarm information.
The Baud/Wfmt and IPA fields are not used from numeric pager types.
from the drop-down menu, see Figure 2.14.
Alpha
PIN/Rcpt/Port
5
6
9:20
06/20/00
10
Alpha numeric pager description
from the drop-down menu.
Numeric
heading.
Phone/Domain
heading.
1. Number of pages
2. Unit name
3. Port # and Address
(Applicable to T/Mon and IAM only)
7
4. Display number
5. Alarm point number
9
6. Alarm status: 1=alarm, 0=clear
7. Time Net Guardian sent page
8. Alarm point description
9. Alarm status
10. Time & date pager received
heading, followed by 7 commas (e.g.
Phone/Domain