Off Hook Signaling - NEC Aspire Manual

You may also be able to use Transfer to UNA. An extension user can Transfer their call to UNA
(i.e., External Paging at night). Once transferred, the call will ring the External Paging speakers like
any other UNA call and can be picked up at any extension. You can also set up Transfer to UNA
through the VRS. This lets outside callers, answered by the VRS, dial a code to have their call ring
External Paging.
Automatic Night Service
The system will allow or deny Automatic Night Service based on the extension's class of service pro-
gramming. If allowed, the calls will then route according to the service patterns programmed. The
Night Service programming is stored in the RAM memory. This means that if the system is not using
the Automatic Night Service, in the case of a power failure while in night mode, when the power is
restored, the system will continue to be in night mode.
Programmable Function Key Can Toggle Night Modes
The software allows a Night Service Programmable Function Key (PGM 15-07 or SC 851: 09 + 0)
to toggle night modes. You can determine in programming how many modes through which the
user will toggle. Note that the additional data for the Programmable Function Key must be set to
"0" for the toggle function to work.

Off Hook Signaling

Aspire S
• Available.
Description
When a user calls an extension busy on a call, they can send an off hook signal through the handset
and through the telephone's speaker indicating they are trying to get through. The signal is an off
hook ringing over the idle (second) line appearance. Off Hook Signaling helps important callers get
through, without waiting in line for the called extension to become free. The system provides the
following Off Hook Signaling options:
●
●
●
●
Product Description
Called Extension Block
The called extension's Class of Service may block incoming Off Hook Signaling attempts.
This is beneÞcial to users that don't want interruptions while on a call.
Automatic Signaling
Calling a busy extension automatically initiates Off Hook Signaling. This option is useful to
receptionists, operators and others that must quickly process calls. This is set in the called
extension's Class of Service.
Manual Signaling
After reaching a busy extension, manual signaling gives the caller the choice of using Off
Hook Signaling or activating other features. Extension's without automatic signaling have
manual signaling. The users can dial a service code or press a Programmable Function Key to
send Off Hook Signaling to the called phone.
Selectable Off Hook Signaling Mode
The Off Hook Signal can be muted ringing, no off hook ringing or a beep in the handset -
based on the caller's programming.
Aspire M/L/XL
• Available.
Section 3: Features
151
3