NEC Aspire Manual page 53

Aspire Wireless (DECT) Deployment Kit — P/N 780146
The Deployment Kit consists of two 2.4GHz Aspire Wireless handsets, a special base station, and
connecting cables all packed into a handy hard-shell briefcase. Before installing the Aspire Wire-
less equipment, the deployment and diagnostics tool can be used to Þnd the best place for the
Base Stations by measuring the area of coverage of a Base Station within the building. Proper
placement for the equipment is required for complete Aspire Wireless phone coverage.
In a building which has multiple telephone systems installed, the Deployment Tool can see all the
systems to determine if there are too may systems running (too much radio activity in the air). It can
be set to Þnd all current stations running, but it is possible, by making a selection of the RFPI num-
ber, to search for a particular group of bases. If you wish to check the range of a particular base in a
multi-base system, the Deployment Tool is able to lock onto the Base Station to avoid handover to
any other units. You can also use the Deployment Tool to see channels with noise levels from -90
dBm to -60 dBm in jumps of 5 dBm.
Aspire Wireless (DECT) Repeater Programming Kit — P/N 780142
The Repeater is synchronized with the Base Station using the Repeater Programming Kit. This
kit provides a cable with an RS232 connection which is used to connect the Repeater to a PC. A
Windows application is then used to deÞne the Base Station with which the Repeater should be
synchronized.
Aspire Wireless (DECT) Service Tool Kit — P/N 780143
The Service Tool Kit contains a uniquely conÞgured serial cable and a special charging unit. In
addition to these items, the latest version of the Service Tool program is required. This can be
downloaded from the Downloads page within the NEC Technical Support web site
(http://ws.necii.com).
These items are used to set up special functions. When connected to a handset, the volume can be
adjusted, the start-up text can be altered, new ßash code and menus and be loaded, and the gain lev-
els of the microphone and loudspeaker for the handset can be adjusted.
Product Description
Section 2: Components
2
45