NEC Aspire Manual page 24

Section 2: Components
SLT Adapter — P/N 0891026
VSR Adapter — P/N 0891026
16
The SLT Adapter converts a digital port from an ESIU PCB into an
analog port which can be used for connecting on-premise 2500
type single line devices (i.e., telephones, fax machines, modems,
etc.). Caller ID is supported by these adapters. The SLT Adapter
provides the ring generator circuit used by the analog device. The
unit provides constant current which is Þxed at 47 mA. Each SLT
Adapter requires its own digital port.
Refer to Single Line Telephones in the Software Manual for more details.
®
The Dterm Voice Security Recorder (P/N 780275) is a
USB device that taps across the digital extension pair of
the NEC telephone system allowing digital recording of
the keyset user's conversation. The Þle created is saved
either to the local PC or to a network location, depending
on the application's setup. This adapter is for use with
digital keysets. It cannot be used with analog, VoIP or
i-Series phones.
The use of monitoring, recording, or listening devices to eavesdrop, monitor, retrieve, or record
telephone conversation or other sound activities, whether or not contemporaneous with transmis-
sion, may be illegal in certain circumstances under federal or state laws. Legal advice should be
sought prior to implementing any practice that monitors or records any telephone conversation.
Some federal and state laws require some form of notiÞcation to all parties to a telephone conver-
sation, such as using a beep tone or other notiÞcation methods or requiring the consent of all par-
ties to the telephone conversation, prior to monitoring or recording the telephone conversation.
Some of these laws incorporate strict penalties.
PC Compatibility
®
The Dterm Voice Security Recorder application supports Microsoft operating systems which sup-
port USB devices such as Windows 98SE, Windows ME, Windows 2000, and Windows XP. Note
that Windows 95 and below, Windows NT and Macintosh operating systems are not supported.
CAUTION
Product Description