Using Your Telephone Cordless II Phone Layout Cordless Lite II Phone Layout R/VOL MUTE HOLD CONF TRANSFER TALK CHAN REDIAL pqrs wxyz oper RING /VOL ON/OFF MUTE 1. Ringer ON/OFF switch 8. Headset Jack HOLD CONF TRANSFER 2. Message Display 9.
Setting Up the Phone Programming Mode . . . 1. At the same time, press and hold Define the four then press TALK. function keys on the • ‘F1=LK01’ shows in the display and the phone (additional key F1 LED flashes red. setup can also be 2.
Placing Calls Switching the Active Phone . . . When the Base Unit This option can only be used on the Cordless II. has an Aspire keyset This must be done when the phones are idle attached, switch otherwise an active call will be disconnected. between the Cordless 1.
1. Press TALK + + Outside number. Dial codes for outside lines: 1. Press TALK + + Line group (1-9 or 001-100) + Outside number. 1. Press TALK + + Line number (e.g., 005 for line 5) + Outside number. Calling a Co-Worker .
Answering Calls 1. To leave a Callback for a busy line or When you hear sys- tem busy, use Camp extension, + TALK. On or Callback • Wait for the system to call you back. (Cont’d): 2. Press TALK. • (Outside calls) Place your call again.
Picking up calls not ringing your phone . . . 1. Press TALK + If a call is ringing over the Page after hours: When a call is ringing 1. Press TALK. • a co-worker’s phone: You can press a Group Call Pickup or Call Coverage function key instead of step 2.
Handling Your Calls Your call can wait at your phone . . . Hold Use Hold instead of 1. Do not hang up + HOLD. • leaving the call This puts your outside call on System off-hook: Hold. Your co-workers can take the call off Hold.
Park a call in orbit Park a call in orbit so a 1. Do not hang up. co-worker can pick it 2. HOLD + + Park Orbit. • Park Orbits are 01-64. For Personal Park, dial 857 instead of #6. 3.
Placing Calls Quickly Automatically redial calls . . . Last Number Redial 1. Press TALK + + REDIAL. If the Quickly redial your Redial key has been reprogrammed, press a last outside call: a programmed Redial function key instead. Save Save your call for (Save).
To dial your stored 1. Press TALK + + Bin (for common). Abbreviated Dialing number: 2. Press TALK + + Bin (for group). • You may also have function keys for Abbreviated Dialing. Controling the volume . . . Ring Tone and Volume 1.
(for ARS) + 001-100 (Outgoing Trunk Group) or (for ARS). Park: *04 + Orbit number Enter (01-64). *0893408* NEC America, Inc., Corporate Networks Group 4 Forest Parkway, Shelton, CT 06484 June 6, 2003 TEL: 203-926-5400 FAX: 203-929-0535 Printed in U.S.A. 0893408 cng.nec.com...