Isdn Compatibility - NEC Aspire Manual

Hide thumbs Also See for Aspire:
Table of Contents

Advertisement

Section 3: Features

ISDN Compatibility

PRI Not Available.
BRI S-Bus Available.
BRI T-Bus Not Yet Available.
CLIP display available with software 1.02+.
Calling Party allowed for extension with software 1.04+.
Option for alert tone for S-Bus terminals calling busy
extension available with 2.63+ software.
T303 timer operation mode option available with 2.63+
software.
Option for PB Back Tone Level available with 2.63+
software.
Ringback tone for BRI trunks requires software 4.04+.
Calling Party Number option to deÞne type requires
software 4.08+.
Description
126
Aspire S
ISDN is an emerging technology on the leading edge of international digital communication's net-
working. Always check with your NEC's Technical Service Representative before setting up your ISDN
application. Working together will ensure maximum compatibility and reliable ISDN performance.
SMDR Includes Dialed Number
The SMDR report can optionally print the trunk's name (entered in system programming) or the
number the incoming caller dialed (i.e., the dialed ISDN digits). This gives you the option of ana-
lyzing the SMDR report based on the number your callers dial. (This option also applies to a DID
trunk as well.)
Display Shows Why Caller ID is Not Available
With Caller ID enabled, the system will provide information for ISDN calls that do not contain the
Caller ID information. If the Caller ID information is restricted, the telephone display will show
"PRIVATE". If the system is not able to provide Caller ID information because the telco informa-
tion is not available, then the display will show "OUT OF AREA".
Aspire M/L/XL
PRI Available.
BRI S-Bus Available.
BRI T-Bus Not Yet Available.
This feature requires the Basic NTCPU (P/N 0891002)
with the PAL upgrade or the Enhanced NTCPU (P/N
0891038) unless using software 4.0E or higher.
CLIP display available with software 1.02+.
Calling Party allowed for extension with software 1.04+.
Option for alert tone for S-Bus terminals calling busy
extension available with 2.63+ software.
T303 timer operation mode option available with 2.63+
software.
Option for PB Back Tone Level available with 2.63+
software.
2 B-Channel Transfer for PRI requires software 2.63+.
Alternate Carrier Access added to ISDN trunks with
ARS requires software 2.64+. Refer to the Automatic
Route Selection (page 138) for additional information.
Ringback tone for BRI trunks requires software 4.04+.
Calling Party Number option to deÞne type requires
software 4.08+.
!! Important !!
Product Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aspire sAspire mAspire lAspire xl

Table of Contents