Park - NEC Aspire Manual

Section 3: Features

Park

• Available - 64 System Park orbits.
• Personal Park Programmable Function Key and Service
Code requires software 2.65+.
Description
156
Aspire S
Park places a call in a waiting state (called a Park Orbit) so that an extension user may pick it up.
There are two types of Park: System and Personal. Use System Park when you want to have the call
wait in a system orbit. Personal Park allows a user to Park a call at their extension so a co-worker can
pick it up. After parking a call in orbit, a user can Page the person receiving the call and hang up. The
paged party dials a code or presses a programmed Park key to pick up the call. With Park, it is not nec-
essary to locate a person to handle their calls. A call parked for too long will recall the extension that
initially parked it, however the call remains in the park orbit until it's answered. There are 64 Park
Orbits (1-64) available for use.
If Caller ID is enabled in the system, a user can check the Caller ID for a parked call using their Park
key and possibly the Flash key (depending on programming).
Splitting Between Parked Calls
A keyset user can retrieve two calls from Park Orbit (for which they don't have line appearances)
and easily split (alternate) between them. The split operation brings the calls to the user's telephone
and frees up the Park Orbits.
Extended Park
An extension's Class of Service determines whether it will use the normal Park Orbit Recall time or
the Extended Park Orbit Recall time. The timers are set up in system programming. When an exten-
sion with Extended Park Recall Class of Service option parks a call, it recalls after the Extended
Park Orbit Recall time. When an extension with the Normal Park Orbit Recall Class of Service
option parks a call, it recalls after the normal Park Orbit Recall time, however the call remains in the
park orbit until it's answered.
Programmable Function Key and Service Code Available for Personal Park
The Personal Park feature is enhanced with the ability to use a Programmable Function Key or ser-
vice code (3-digit or 1-digit) to place a call in Personal Park. Older software only provides the
option to place a call in Personal Park using a 3-digit service code. With this ability, two new pro-
gram options have been added to the system in Program 11-16-11 and 15-07-01. This option is
available for keysets, single line sets, and Aspire Wireless telephones and can be used for analog or
ISDN trunks.
With this feature, the following conditions apply:
● An extension can have only one Personal Park key.
● When the terminal that has a call in Personal Park is unplugged, the Personal Park will be
released and the held caller will receive busy tone.
Aspire M/L/XL
• Available - 64 System Park orbits.
• Personal Park Programmable Function Key and Service
Code requires software 2.65+.
Product Description