I-Series Telephones - NEC Aspire Manual

Section 3: Features

i-Series Telephones

• Not Available.
Description
122
Aspire S
Each 16DSTU PCB provides the Aspire system the ability to connect up to 16 i-Series telephones
with each port supporting 1 B-channel. The system allows up to 15 DSTU PCBs (limited by load
factor) to be installed, allowing up to 240 i-Series telephones to be connected. Each phone having a
load factor of "3". The following i-Series phones are compatible with the Aspire system:
Model 2 922xx/926xx Series Keysets
32-Button Display Phone, P/N 92293B / 92293W / 92673
32-Button Standard Phone, P/N 92290B / 92290W / 92670
16-Button Display Phone, P/N 92373C / 92373W / 92573 / 92563
16-Button Standard Phone, P/N 92370B / 92370W / 92570 / 92560
Model 3 i-Series Keysets *
34-Button Display Phone, P/N 92783
28-Button Display Phone, P/N 92763
28-Button Standard Phone, P/N 92760
22-Button Display Phone, P/N 92753A / 92750A
* i-Series keysets do not have a gain setting database and will use the phone's initial setting
In addition, the following hardware is also supported using DSTU ports:
●
Remote Extender
The following i-Series hardware is NOT supported on the Aspire system:
● 2OPX
● 3ACI
● 900/900i/910i Cordless Phone
● DCI-A/B
● DCI-L
● Digital VANGARD Voice Mail
●
DSLT
● DSS Consoles (24-Button or 110-Button)
● VAU
● Analog Module
● Data Module
● Off-Hook Voice Announce Module
● Speakerphone Module
●
Super Display Phones
Aspire M/L/XL
• Available with software 1.06+.
Product Description