grammable Feature. The key lights while the extension is in the Headset mode, and is off while the Headset
mode is disabled. If an extension user is on a call, pressing the Headset key automatically switches the
active call to the headset. Pressing the Headset key again switches the call back to Handsfree.
Off-Hook Signaling and Headsets
Outside Calls (transfers and DILs)
If the extension is set up to receive Camp-On tones for waiting (transferred) outside calls, the user will hear
the Camp-On tones in their headset. They will also hear Camp-On tones in their headset for a waiting Direct
Inward Line (DIL). The extension will not, however, receive Camp On tones for Key Ring calls ringing the
phone while it is in the headset mode.
An extension in the headset mode will not hear Off-Hook Ringing.
Intercom Calls
If the extension is set up to receive Camp-On tones for waiting Intercom calls, the user will hear tones in
their headset when a co-worker dials
Operation
To connect the headset:
Plug a compatible headset into the telephone headset jack.
1.
To turn the headset mode on and off:
Do one of the following.
1.
a.
Press the headset Feature Key on your telephone or DSS Console.
Use the User Programmable Features (see below).
b.
While in the headset mode:
You can do the following.
1.
Press a line key to place or answer an outside call.
a.
Press
INTERCOM
b.
If on a call, press
c.
User Programmable Feature
Feature
Headset Compatibility
DSX Feature Handbook
to wait in line.
2
Using the Headset
to get Intercom dial tone.
SPEAKER
to hang up.
Turning the Headset Mode On and Off
Mnemonic
#HS (#47)
#HS
+
Y
to enable or
Headset Compatibility
Operation
N
to disable +
SPEAKER
to exit.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
Access Level
3-5
Features ◆ 85