NEC Aspire Manual page 200

Section 3: Features
192
IntraMail for Aspire S
The Aspire S IntraMail port assignments are Þxed and should not be changed. The following is the
default IntraMail:
●
Program 16-02-01 : Department Group Assignments for Extensions
IntraMail ports assigned to Department Group 8.
343=Order 43
344=Order 44
345=Order 45
346=Order 46
347=Order 47
348=Order 48
349=Order 49
350=Order 50
● Program 11-07-01 : Department Group Pilot Numbers
Master number is 700.
●
Program 45-01-01 : Voice Mail Integration Options - Voice Mail Department Group
Number
IntraMail Department Group is Group 8.
●
Program 15-03-01 : Single Line Telephone Basic Data Setup - SLT Signaling Type
Set for DP (0).
● Program 15-03-03 : Single Line Telephone Basic Data Setup - Terminal Type
Set to Special (1).
● Program 22-07-01 : DIL Assignment
Trunks terminate to 343.
IntraMail for Aspire M
The Aspire software now provides support for the IntraMail. Previously, this was only available for
the Aspire S system. With this change, the 47-xx programs used for IntraMail are now available
with the Aspire M. Refer to the IntraMail System Guide (P/N 0893240) for complete details on set-
ting up the IntraMail.
The boot code for the Aspire system must be at the current level of 1.20 for IntraMail to function.
Refer to the Boot Code Update Instructions, P/N 0893211 for details on updating. The current ver-
sion number can be displayed with history enabled (DIMU) after rebooting the system. The version
number will show on the Þrst line of the display. Contact NEC's Sales Support in order to obtain an
boot update card if needed.
If the IntraMail will not be used, make sure Program 47-01-17 : IntraMail System Options -
Start of IntraMail Port is set to "0" (this is the default setting). If there is an entry in this program,
8 ports will be reserved for IntraMail usage. This could prevent the system from reaching the full
port capacity. This could be important especially when using the 64-port CPU (P/N 0891002).
IntraMail System Requirements
● Aspire M System Software version 4.93 or higher.
● 64-Port NTCPU (P/N 0891002) with basic factory-installed PAL chip or with the Feature
Upgrade PAL chip (P/N 0891039)
IntraMail will not work with the Enhanced NTCPU (P/N 0891038).
● 8 Unassigned Ports in the Aspire System
Using IntraMail reduces the number of available ports in the system.
●
IntraMail Kit
Product Description