Traffic Reports; Transfer - NEC Aspire Manual

Section 3: Features
TrafÞc Reports
• Available.
Description
The system provides the ability to send data to a PC connected to the Aspire. The telephone call trafÞc data
for each extension is captured for use with the SMDR feature.
Call TrafÞc
The total of outgoing call frequency, outgoing call duration, call charge, incoming call frequency, answer
frequency, incoming call duration, ringing duration for each line and extension, and abandon call frequency
for each line is logged. The total of incoming calls, answer frequency, call duration for each line and exten-
sion, and abandon call frequency of each line is logged and the data is outputted to the PC. The system totals
the hour, day, week, and month for each terminal and trunk number. This information is used by the SMDR
feature. The extension which is totalled is determined by system programming. The system outputs this data
to the PC for the total period.

Transfer

• Available.
• Transfer into Conference available.
• Transfer to trunk ring group requires software 2.63+.
• Pressing Transfer key (15-07 or SC 851:06) places call
on hold requires 4.0E+.
• Step Transfer for Auto Trunk-to-Trunk Transfer requires
software 4.93+.
Description
182
Aspire S
Aspire S
Transfer permits an extension user to send (i.e., extend) an active Intercom or outside call to any
other extension in the system. With Transfer, any extension user can quickly send a call to the
desired co-worker. A call a user transfers automatically recalls if not picked up at the destination
extension. This assures that users do not lose or inadvertently abandon their transfers. While a
transferred call is ringing an extension the system can optionally play ringback tone or Music on
Hold to the caller.
Aspire M/L/XL
• Available.
Aspire M/L/XL
• Available.
• Transfer into Conference available with software 1.11+.
• Transfer to trunk ring group requires software 2.63+.
• Pressing Transfer key (15-07 or SC 851:06) places call
on hold requires 4.0E+.
• Step Transfer for Auto Trunk-to-Trunk Transfer requires
software 4.93+.
Product Description