Relevant Manuals - Omron NJ Series Startup Manual

Relevant Manuals

The following table provides the relevant manuals for the NJ-series CPU Units. Read all of the man-
uals that are relevant to your system configuration and application before you use the NJ-series CPU
Unit.
Most operations are performed from the Sysmac Studio Automation Software. Refer to the Sysmac
Studio Version 1 Operation Manual (Cat. No. W504) and the Sysmac Studio Robot Integrated System
Building Function with Robot Integrated CPU Unit Operation Manual (Cat. No. W595) for information
on the Sysmac Studio.
Purpose of use
Introduction to NJ-series Controllers
Setting devices and hardware
Using motion control
Using EtherCAT
Using EtherNet/IP
Using robot control for OMRON robots
Software settings
Using motion control
Using EtherCAT
Using EtherNet/IP
Using robot control for OMRON robots
Using robot control with NJ Robotics function
Writing the user program
Using motion control
Using EtherCAT
Using EtherNet/IP
Using robot control for OMRON robots
Using robot control with NJ Robotics function
Programming error processing
Testing operation and debugging
Using motion control
Using EtherCAT
Using EtherNet/IP
Using robot control for OMRON robots
Using robot control with NJ Robotics function
NJ-series Robot Integrated System Startup Guide (O049)
Basic information
¡
¡
¡
¡
¡
¡ ¡
¡ ¡
¡
¡
Relevant Manuals
Manual
¡
¡
¡
¡
¡
¡ ¡ ¡
¡
¡
¡ ¡ ¡
¡ ¡ ¡
¡
¡
¡ ¡ ¡
¡
¡
¡
¡
3