System Options - Micromeritics GEMINI VII KEYPAD Operator's Manual

3 Command Prompts
S O
YSTEM PTIONS
Analysis Conditions on page 3 - 14
Press CHOICE to display the options. Press ENTER to select.
The parameters specified for most of these prompts apply to all Set Up groups. The parameters
specific to a Set Up group are marked accordingly.
System Options Functions
Function
Language
ID for Setup*
3 - 38
Description
Choices: English, Deutsch, Francais, Espanol, Italiano
After selecting a language, the change is effective immediately: there is
no need to press SAVE. For example, the next prompt displays in Italian
if Italiano was selected. However, any error messages that may be in the
message queue remain in English (or the current selected language) are
not translated. Error messages that occur after selecting the language
are shown in that language.
Keypad overlays containing translations for the alternate functions
printed above the keys for each language are available on the
Micromeritics web page (www.Micromeritics.com).
Enter the ID for the Set Up group.
Press . (decimal) on the keypad to enter a dash (-).
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021