Command Prompts - Micromeritics GEMINI VII KEYPAD Operator's Manual

3 C P
OMMAND
M C
ULTIPLE HOICE
A fixed set of responses and is followed by a question mark (?). This Set Up Type example is a
multiple-choice prompt:
There are four Set Up types: Analysis Conditions, Report Options, Communications, and System
Options.
D E
ATA NTRY
A data entry prompt is followed by a colon (:), prompting to make an entry. The type of entry
requested is displayed on the third line. The fourth line is used for the entry.
The following prompt displays when performing an analysis and requests a value for the sample
mass. Use the keypad to enter the mass. Press ENTER to save the entry and advance to the next
prompt.
If applicable, attach a keyboard to a USB port on the analyzer and use the keyboard to
make entries.
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021
ROMPTS

3 Command Prompts

3 - 1