Micromeritics GEMINI VII KEYPAD Operator's Manual page 82

3 Command Prompts
Report Options (continued)
Option
Pore geometry
3 - 30
Description
Select the shape which best represents the physical geometry of the
micropores in the sample material.
Choices: Slit, Cylinder, Sphere
If Slit or Cylinder is selected, enter the Interaction param. to be used for
report calculations.
Input into this field is slightly different from that of other fields. The
significand and the exponent can be edited. For example, the prompt
shown above displays 3.49 as the significand. Enter 2.34 to replace
3.49; the next keystroke automatically replaces the exponent.
Range: 1.00e-46 to 9.99e-40 erg cm
Default: 3.49e-43 erg cm
4
4
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021