Micromeritics GEMINI VII KEYPAD Operator's Manual page 88

3 Command Prompts
Communications Functions (continued)
Function
E-mail Address
E-mail Server
3 - 36
Description
When connected to a network via an Ethernet connection, analysis
results can be e-mailed automatically upon completion. Enter the
email address to receive these reports. A keyboard must be used to
complete this function. If not using DHCP and the e-mail address is
outside the local network, a gateway address must be specified.
Enter the e-mail address.
Enter the numerical address of the SMTP server (the computer that is
going to deliver the results).
Your IT Department may need to configure the server to accept e-mail
from the analyzer. For proper configuration, the following information
may be required:
IP address for the Gemini
n
Sender line: Micromeritics_2390
n
Gemini VII Keypad Operator Manual
239-42801-01 (Rev E) — July 2021