Co-Recording Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

1.
Select "0000: RJ71GN11-T2 (Master Station) [RX/RWr]" for "Transfer Source Module" and "0020: RJ71GP21-SX
(Normal Station)" for "Transfer Destination Module", and enter the transfer ranges of link devices.
2.
Click the [OK] button.
If the transfer destination network module is on a network other than CC-Link IE TSN, set the transfer
destination link devices within the own station send range of the network module. If the link devices are set
within the send range of another station, the transferred data are overwritten with the send data of another
station.
Master station
(station No.0)
0

Co-recording Setting

Set whether to relay a co-recording trigger.
By changing the co-recording setting of the master station or local stations, the range of co-recording on the network can be
changed.
For details on the co-recording setting, refer to the following.
 MELSEC iQ-R System Recorder Co-recording Function Reference Manual
Item
Co-recording Setting
Setting the time synchronization is recommended to ensure that the reference time (JST) of the recording
data among the multiple devices are the same. ( Page 75 Time synchronization)
2 PARAMETER SETTINGS
116
2.4 Application Settings
RX
0 to 3F
1000 to 103F
Description
Set whether to send/receive a co-recording trigger among own station and other stations on the same
network. Even when the parameter is set to "Not Use", a co-recording trigger received from another
station is sent to other stations.
Network module
LB
0
Set this within its own
station send range of
the network module.
1000
Own station send range
Other station send range
Setting range
(Default: Not Use)
• Not Use
• Use