11.
Set the items in "Application Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Application Settings]
12.
Click the [Apply] button.
13.
Write the set parameters to the CPU module on the master station. Then, reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In the program example, default values are used for parameters that are not shown above. For the
parameters, refer to the following.
Page 94 PARAMETER SETTINGS
Settings in the remote stations
Set the setting of the IP address set in "Network Configuration Settings" of the master station.
3 PROGRAMMING
138
3.2 Communication Example with CC-Link IE TSN Class A Remote Station