Device Configuration - Omron NJ Series Network Connection Manual

5.2. Device Configuration

The hardware components to reproduce the connection procedure of this document are as
follows:
Personal computer
(Sysmac Studio installed,
OS: Windows 7)
USB cable
Manufacturer Name
OMRON NJ-series CPU Unit
(Built-in EtherNet/IP port)
OMRON Power Supply Unit
OMRON Switching Hub
OMRON Sysmac Studio
OMRON Sysmac Studio project file
- Personal computer
(OS:Windows7)
- USB cable
(USB 2.0 type B connector)
- LAN cable
OMRON RFID Reader/Writer
OMRON Antenna (Circular) (4 max.)
OMRON Antenna cable
OMRON AC Adapter (included)
Precautions for Correct Use
Prepare the latest project file in advance.
To obtain the file, contact your OMRON representative.
Precautions for Correct Use
Update the Sysmac Studio to the version specified in this section or higher version using the
auto update function. If a version not specified in this section is used, the procedures
described in Section 7 and subsequent sections may not be applicable. In that case, use the
equivalent procedures described in the Sysmac Studio Version 1 Operation Manual (Cat.No.
W504).
5. Applicable Devices and Support Software
NJ501-1500
(Built-in EtherNet/IP port)
Switching hub
W4S1-05C
RFID Reader/Writer
(V750-BA50C04-US)
LAN cable
Antenna
(V740-HS01CA)
Model
NJ501-1500
NJ-PA3001
W4S1-05C
SYSMAC-SE2[][][]
OMRON_V750_ETN(TCP)
_EV101.smc
-
-
-
V750-BA50C04-US
V740-HS01CA
V740-A01[][]M
-
AC Adapter
(included)
Antenna Cable
(V740-A01 [][]M)
Version
Ver.1.03
Ver.1.0
Ver.1.04
Ver.1.01
Ver.102-10
2-103-0
7