Novatech Bitronics M87X Series Manual page 30

biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and 0.01% for cadmium, or
qualify for an exemption to the limits as defined in Annex III or Annex IV of the RoHS
Directive. Bitronics LLC certifies that the object(s) of declaration meet(s) the material
requirements of the RoHS Directive 2011/65/EU, except where an exemption is allowed by
the Directive. ROHS compliant means that the substances restricted by the RoHS
Directive and the subsequent amendments of the European Parliament are not contained
in the finished product above the Maximum Concentration Limits, as stated below (in the
table), unless the restrictive substance is subject to an exemption contained in Annex III or
Annex IV of the RoHS Directive and subsequent amendments.
RoHS part compliance information has been determined based upon reasonable inquiries
of our suppliers and represents our current actual knowledge based on the information
provided.
Restricted Substance for EU RoHS
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent chromium (Cr)
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers (PBDE)
Bis(2-ethylhexyl) phthalate (DEHP)
Butyl benzyl phthalate (BBP)
Dibutyl phthalate (DBP)
Diisobutyl phthalate (DIBP)

'homogeneous material' means one material of uniform composition throughout or a material, consisting of a
combination of materials, that cannot be disjointed or separated into different materials by mechanical actions
such as unscrewing, cutting, crushing, grinding and abrasive processes;
RoHS Exemptions:
Parts that exceed the maximum concentration limits at the homogeneous material level
rely exclusively on the following exemption(s):
1. Exemptions allowed in Annex III, entitled Applications exempted from the
restrictions in Article 4(1):
6(c): Copper alloy containing up to 4% lead by weight.
7(a): Lead in high melting temperature type solders (i.e. lead-based alloys
containing 85% by weight or more lead).
7(c)-1: Electrical and electronic components containing lead in a glass or
ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or
in a glass or ceramic matrix compound.
2. Exemptions allowed in Annex IV, entitled Applications exempted from the
restriction in Article 4(1) specific to medical devices and monitoring and control
instruments, as amended by Directive 2014/74/EU:
36. Lead used in other than C-press compliant pin connector systems for
industrial monitoring and control instruments. Expires on 31 December 2020. May
be used after that date in spare parts for industrial monitoring and control
instruments placed on the market before 1 January 2021.
ML0021 August 15, 2018
Maximum Concentration Limit
(Allowable limit at homogeneous material level*)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.01% by weight (100 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm)
0.1% by weight (1000 ppm), effective from 22 July 2021
0.1% by weight (1000 ppm), effective from 22 July 2021
0.1% by weight (1000 ppm), effective from 22 July 2021
0.1% by weight (1000 ppm), effective from 22 July 2021
14
Copyright 2018 Bitronics, LLC