Novatech Bitronics M87X Series Manual page 16

installing the Power Supply Module (Vxx) or the Signal Input Module (S1x).
All connections to a module must be removed before removing the module. Do not
attempt to install a module with signals connected.
Fiber optic communication
Where fiber optic communication devices are fitted, these should not be viewed directly.
Optical power meters should be used to determine the operation or signal level of the
device.
WARNING: EMISSIONS – CLASS A DEVICE (EN55011)
This is a Class A industrial device. Operation of this device in a residential area may
cause harmful interference, which may require the user to take adequate measures.
DECOMMISSIONING AND DISPOSAL
1. Decommissioning
The auxiliary supply circuit in the equipment may include capacitors across the
supply or to ground (earth). To avoid electric shock or energy hazards, after
completely isolating the supplies to the relay (both poles of any dc supply), the
capacitors should be safely discharged via the external terminals before
decommissioning.
2. Disposal
It is recommended that incineration and disposal to watercourses is avoided. The
product should be disposed of in a safe manner. Any products containing batteries
should have them removed before disposal, taking precautions to avoid short
circuits. Particular regulations within the country of operation may apply to the
disposal of lithium batteries.
ML0021 August 15, 2018
xv
Copyright 2018 Bitronics, LLC