Physts Register Contents (P1X) - Novatech Bitronics M87X Series Manual

Table of Contents

Advertisement

8.13.3 PHYSTS Register Contents (P1x)

The Ethernet software driver supplies to the upper protocol layers a modified copy of the
PHYSTS register of the PHY controller chip at the time a link is established. Many of the
bits in the register are of no use to the M87x user. Bit 0 is the least significant bit.
BIT
DESCRIPTION
9
1=Auto-negotiation enabled for the M87x
3
1=Link partner auto-negotiable, 0=network hub/switch does not support auto-negotiation
2
1=Full Duplex, 0=half duplex (differs from PHYTER register definition) (reflects duplex LED)
1
1=10 Mb speed in use, 0=100 Mb speed (if 100 LED on, then this bit is zero)
0
1=Link valid (follows Link LED).
ML0021
August 15, 2018
116
Copyright 2018 Bitronics, LLC

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents