Environmental; Physical - Novatech Bitronics M87X Series Manual

Maximum Output Power and Current (5V and 3.3V supplies are independent):
Nominal Max Output Power
Vin 3.3V
24Vdc 12.5W
48Vdc 17.5W
69Vac 17.5W
125Vdc 17.5W
120Vac 17.5W
250Vdc 17.5W
230Vac 12.5W
240Vac 12.5W
* M871 -V10 -S10 -H10 -A10 -P11 -P30 (all relays energized)
The +12Vdc output is derived from the 3.3Vdc output, and the -12Vdc output is derived
from the 5Vdc output. The +/- 12Vdc outputs are capable of providing up to 500mA,
however, they must be de-rated to avoid exceeding the maximum power limits of the
3.3Vdc and 5Vdc outputs respectively.

6.3.1 Environmental

Operating Temperature: -40C to 70C
Relative Humidity:
Installation Category:

6.3.2 Physical

Input Connections:
Backplane Connections: Standard cPCI-specified power connector
ML0021
5V Total
12.5W 25W
17.5W 35W
17.5W 35W
17.5W 35W
17.5W 35W
17.5W 35W
12.5W 25W
12.5W 25W
0-95% non-condensing
IC III (Distribution Level), Pollution Degree 2. Refer to definition
on page 9.
Removable terminal block accepts #26-12 AWG (0,15-3,3mm
wire, or terminal
Recommended minimum wire size is #18 AWG (0,5 mm
Recommended Torque Rating for the terminal block wire
fasteners is 10 In-Lbs, 1.13N-m. Precautions must be taken to
prevent shorting of lugs at the terminal block.
distance of 0.1" (2.5mm) is recommended between un-insulated
lugs to maintain insulation requirements.
(5,08mm) header socket accepts other standard terminal types.
August 15, 2018
Max Output Current
3.3V 5V
3.75A 2.5A
5.3A 3.5A
5.3A 3.5A
5.3A 3.5A
5.3A 3.5A
5.3A 3.5A
3.75A 2.5A
3.75A 2.5A
lugs up to 0.325"
84
Copyright 2018 Bitronics, LLC
Min Interruption
Ride-Through*
ms
2.5ms
6.5ms
10ms
35ms
50ms
140ms
220ms
230ms
(8,25mm) wide.
2
A minimum
Standard 0.200"
2
)
).