Novatech Bitronics M87X Series Manual page 161

When a cross-trigger is received from another unit, it comes in the form of a GOOSE
3.
subscription (set up in the IED Configurator in step 7, below). GOOSE subscriptions
are represented in the 70 Series Configurator by binary inputs that can be used to
trigger WR1 and make an entry in the SOE Log. In this example, events 3, 4, and 5
shown in Figure A7 are the binary inputs received by subscribing to the GOOSE
messages published by three other M871s on the network. This completes the settings
that are made in the 70 Series Configurator.
The following settings must be made in the IED Configurator: Configuring an M871 to publish a
4.
GOOSE is a two step process. Figures A8 and A9 illustrate the first step, defining a Dataset
that includes the soft bit described in step 2, above (Records/WrxRDRE1.ST.RcdStr.stVal).
ML0021
Figure A 6
Figure A 7
August 15, 2018
145
Copyright 2018 Bitronics, LLC