Novatech Bitronics M87X Series Manual page 172

Simplified configuration for distance-to-fault measurement
Improved transducer input data update rate
Improved accuracy on frequency measurement to 1mHz
Increased waveform capture length of individual file
V3.03 Maintenance Upgrade
V3.04 New Product Release
Added Peak Fault Current Measurements
Added Virtual I/O into Disturbance Recorders
Added support of control characters for text/SMS messages
Improved password security
V3.05 New Product Release
Added support for dual peak current input range M872 (S16, S17),
Added IEEE C37.232 naming convention
Added periodic triggering
Increased to 4 IEC 61850 buffered reports
V3.06 Maintenance Upgrade
V3.07 New Product Release
Increased pre and post trigger times for DR recorders
Modified base memory to 1MB
V3.08 Maintenance Upgrade
V3.09 Support for split core CT in M571 only
Added maximum voltage difference as additional trigger value
V4.01 Support for H12 and H12 Ethernet (E1, E3) modules
V4.02 Support for IEC 61850 deadbands
V4.07 Support for IEC 61850 configuration option and DNP3 certification
Maintenance upgrade
V4.082 Support for S1C Split-Core Option
V4.084 Maintenance upgrade
V4.09 Support for P33 module
V4.10 Maintenance upgrade
V4.11 Add double point status object for input bit pairs, add IEC61850 support for
P33 module
ML0021 August 15, 2018
156
Copyright 2018 Bitronics, LLC