Specifications - Novatech Bitronics M87X Series Manual

9.3 Specifications

Inputs: 8 (P30A) or 16 (P31) uni-directional, isolated inputs (4 are shared with output
relays ) jumper selectable for voltage range. Input terminals have internal
510V clamp.
Low Input Voltage Range
Input Range:
Threshold Voltage: 15V dc +/-1V (at 25C)
Input Resistance:
High Input Voltage Range
Input Range:
Threshold Voltage: 70Vdc +/-3.5V (at 25C)
Input Resistance:
Input Channel-to-Channel Time Resolution:
Outputs: 8 isolated outputs on P33; 4 isolated outputs, terminals shared with 4 inputs
(P30A, P31); jumper selectable for Normally Closed (NC) or Normally Open
(NO) operation and for energized or de-energized condition. Output
terminals have internal 510V clamp.
Output Maximum Switched Current (Resistive)
Input De-bounce Time:
Output Operate Time (time from command by Host, does not include protocol delays)
Assert (Close time with "N.O." jumper):
Release (Open time with "N.O." jumper):
Input Delay Time (from terminals):
Indicator LEDs
Inputs:
Outputs:
Isolation
I/O Terminals to Case:
I/O Channel to Channel:
ML0021
0 to 100Vdc
33kΩ
0 to 300Vdc
153kΩ
Tripping
(C37.90
Resistive)
Voltage
30A
24Vdc
30A
48Vdc
30A
125Vdc
30A
250Vdc
Selectable, from 60ns to 260s in 60 ns steps.
<100µs
Green, on when input voltage exceeds threshold.
Amber, on when relay coil is energized.
2000Vac, 1min
1500Vdc, 1min
August 15, 2018
200µs (maximum)
Continuous Break
Carry (Inductive)
5A 8A
5A 700mA
5A 200mA
5A 100mA
8ms
3ms
119
Copyright 2018 Bitronics, LLC